Recommended starting point
Glowforge Pro settings for Natural Slate
These rows are baseline laser settings for Natural Slate on the Glowforge Pro. Use them to start calibration, then run a small test cut or test engrave on scrap from the same batch before production work.
Laser typeCO2
Wattage45W
Material categoryStone
Safety and test-cut noteLaser settings are not guaranteed to be perfect. Lens condition, focus, material batch, glue, pigment, moisture, bed height, and air assist can all change the result. Start with a small test grid, watch for flame or smoke buildup, and keep ventilation running.
Calibration table
Use these as starting points for your own machine log.
| Thickness | Action type | Speed mm/s | Power percent | Passes | Air assist |
|---|---|---|---|---|---|
| N/A | engrave | 45 | 80% | 1 | No |
Quick FAQs
Are these Glowforge Pro settings guaranteed for Natural Slate?
No. Treat them as recommended starting points. Run a small test cut or engrave before you use a full sheet or finished part.
Why does 45W matter?
Wattage affects how much energy can be delivered at a given speed. A lower wattage machine may need slower speed or more passes than a higher wattage machine.
Should I change air assist for Natural Slate?
Follow the row when air assist is listed, then adjust during testing. Air assist can reduce flare-ups and improve cut edges, but some engraving jobs may need less airflow.